The DJI Manifold 3 Accessory Kit (Matrice 400) is the purpose-built hardware set that connects and secures the DJI Manifold 3 onboard computer to the DJI Matrice 400 aircraft. It provides the aircraft-specific connector, coaxial cable, mounting screws and installation tools needed for a clean, durable fit. The Manifold 3 onboard computer is sold separately.
Purpose-built for the Matrice 400
A Matrice 400 specific connector and coaxial cable to integrate the Manifold 3 onboard computer with the aircraft.
Complete mounting hardware
Includes all required connector and coaxial cable screws for both the Matrice 400 and the Manifold 3 side of the install.
Tools included
Ships with a screwdriver handle and two multi-bit drivers covering Phillips, 2.5 mm, 1.5 mm and 2.0 mm hex.
What the kit does
This kit provides the physical connection and mounting between the DJI Matrice 400 airframe and the DJI Manifold 3 onboard computer. Correct installation supports stable, durable mounting and a reliable connection, so the platform can run onboard computing and edge AI workloads.
When installing the coaxial cable, ensure the cable screws are fully tightened to prevent disconnection or reduced water resistance due to flight vibrations. Use the 1.5 mm screwdriver bit to press the Manifold 3 reset button to restore factory settings.
In the box
- 1x Connector (Matrice 400)
- 1x Coaxial Cable (Matrice 400)
- 6x Connector Screw (Matrice 400)
- 6x Connector Screw (Manifold 3)
- 2x Coaxial Cable Screw (Matrice 400)
- 2x Coaxial Cable Screw (Manifold 3)
- 1x Screwdriver Handle
- 1x Screwdriver Bit (Phillips and 2.5 mm hex)
- 1x Screwdriver Bit (1.5 mm and 2.0 mm hex)
The DJI Manifold 3 onboard computer is not included and is sold separately. This kit contains mounting and connection hardware and tools only.
Specifications
| Weight | 24.3 g (measured for the connector, coaxial cable and required screws only; it excludes the screwdriver handle and bits). |
|---|---|
| Compatibility | DJI Manifold 3; DJI Matrice 400. This kit is specific to the Matrice 400. |
| Manufacturer part number (MPN) | CP.EN.00000697.01 |
| UPC | 190021149670 |
Compatibility and FAQ
This kit is designed specifically for mounting the DJI Manifold 3 to the DJI Matrice 400. The DJI Matrice 4 Series and Matrice 4D Series use their own separate kits.
Does this kit include the Manifold 3 onboard computer?
No. This kit contains the connector, coaxial cable, mounting and cable screws, screwdriver handle and bits only. The DJI Manifold 3 onboard computer is sold separately.
Is this kit compatible with the Matrice 4 or Matrice 4D Series?
No. This kit is specific to the DJI Matrice 400. The Matrice 4 Series and Matrice 4D Series use their own separate kits.
Related Products
DJI Manifold 3 Onboard Computer
The high-performance onboard computing module that this kit mounts to the aircraft. Sold separately.
View product
DJI Matrice 400 Drone
The enterprise airframe this accessory kit is built for, ready to carry onboard computing and edge AI workloads.
View product
DJI Zenmuse H30T
A multi-sensor payload to pair with your Matrice platform for demanding inspection and public safety missions.
View productGet a Quote
Request pricing and availability for the DJI Manifold 3 Accessory Kit (Matrice 400) from our team in South Africa. Complete the form below and a GoUAV specialist will respond.
Prefer to reach us directly?
Phone: +27 11 557 9200
Email: sales@gouav.co.za
By submitting an enquiry you agree to our privacy policy. If the form does not load, please use the phone or email contact above.