The DJI Manifold 3 Accessory Kit (Matrice 4 Series) connects and secures the DJI Manifold 3 onboard computer to the DJI Matrice 4 Series aircraft. It bundles the Matrice 4 connector, coaxial cable and the exact screws, screwdriver and hex key needed for a clean, vibration resistant install.
Purpose built connection
Links the Manifold 3 onboard computer to a Matrice 4 Series aircraft using the kit specific connector and coaxial cable.
Secure, vibration ready
Includes connector screws and coaxial cable screws designed to stay tight against flight vibrations when fully torqued.
Tools included
Ships with a Phillips screwdriver and a hex key, so you have everything on hand for installation and the Manifold 3 reset button.
Everything to mount Manifold 3
This kit provides the physical and data connection between the DJI Manifold 3 and the DJI Matrice 4 Series. In the box you receive 1x Connector (Matrice 4), 1x Coaxial Cable (Matrice 4), 6x Connector Screw (Manifold 3), 2x Coaxial Cable Screw (Manifold 3), 1x Phillips Screwdriver and 1x Hex Key.
Measured weight is 33.7 g for the connector, coaxial cable and required screws only, excluding the screwdriver and hex key.
Smart 3D Explore with Matrice 4E
When integrated with the DJI Matrice 4E, Manifold 3 enables Smart 3D Explore for real-time spatial mapping and flight-route planning in unknown environments.
During installation, ensure the coaxial cable screws are fully tightened to prevent disconnection or reduced water resistance due to flight vibrations. Use the hex key to tighten the connector screws so they do not loosen in flight. The hex key can also be used to press the Manifold 3 reset button to restore factory settings.
Specifications
| Product | DJI Manifold 3 Accessory Kit (Matrice 4 Series) |
|---|---|
| MPN | CP.EN.00000698.01 |
| Weight | 33.7 g (measured for the connector, coaxial cable and required screws only; excludes screwdriver and hex key) |
| Function | Connects and secures the DJI Manifold 3 onboard computer to the DJI Matrice 4 Series aircraft |
| Compatibility | DJI Manifold 3; DJI Matrice 4 Series (Matrice 4E / 4T) |
| Not compatible | Matrice 4D / 4TD Series (uses CP.EN.00000699.01); Matrice 400 (uses CP.EN.00000697.01) |
In the box
- 1x Connector (Matrice 4)
- 1x Coaxial Cable (Matrice 4)
- 6x Connector Screw (Manifold 3)
- 2x Coaxial Cable Screw (Manifold 3)
- 1x Phillips Screwdriver
- 1x Hex Key
Compatibility and FAQ
Which aircraft does this kit fit?
This kit is for the DJI Manifold 3 paired with the DJI Matrice 4 Series, specifically the Matrice 4E and Matrice 4T.
Does it work with the Matrice 4D or 4TD?
No. The Matrice 4D / 4TD Series uses a separate kit, CP.EN.00000699.01. This kit is not compatible with those models.
Can I use it on the Matrice 400?
No. The Matrice 400 uses a separate kit, CP.EN.00000697.01. This kit is only for the Matrice 4 Series.
Are tools included?
Yes. The kit includes a Phillips screwdriver and a hex key. The hex key can also press the Manifold 3 reset button to restore factory settings.
Related Products
DJI Manifold 3
DJI Matrice 4T
Manifold 3 Kit (Matrice 400)
Get a Quote
Request pricing and availability for the DJI Manifold 3 Accessory Kit (Matrice 4 Series) from our team in South Africa. Complete the form below and a GoUAV specialist will respond.
Prefer to reach us directly?
Phone: +27 11 557 9200
Email: sales@gouav.co.za
By submitting an enquiry you agree to our privacy policy. If the form does not load, please use the phone or email contact above.